160152

Bearing Separator And Puller Set

SKU: 160152
2pcs. bearing separators.
2pcs. bolts with nuts and washers.
2pcs. pawls with nuts.
4pcs. connecting bolts with nuts.
1pc. yoke.
1pc. counter screw.
2pcs. counter screw adapters cone,flat complete with molded case.

161053:
Contents:
a.Separator φ30-50mm, φ50-75mm
b.Thrust Bolt 180mm
c.Extension Bars 4*130, 4*105mm
d.Cross Beam 160mm
Separator Size: Maximun Reach:
φ30-50mm 170mm
φ50-75mm 220mm

SKU: 160152. Category: .

The Bearing Separator And Puller Set Introduction:

Bearing Separator And Puller Set Description:160153-Bearing-Separator-And-Puller

SKU: 160152
Contents:
2pcs. bearing separators.
2pcs. 5-1/2″ (12TPL) bolts with nuts and washers.
2pcs. 6″*3/8″ (16TPL) pawls with nuts.
4pcs. 6-3/4″connecting bolts 3/8″ (16TPL)5/16″ (18TPL) with nuts.
1pc. yoke.
1pc. 5-1/2″*9/16″ (10TPL) counter screw.
2pcs. counter screw adapters cone
flat complete with molded case.

SKU: 160153
Contents:
a.Separator φ30-50 mm, φ50-75 mm
b.Thrust Bolt 180 mm
c.Extension Bars 4*130, 4*105 mm
d.Cross Beam 160 mm
Separator Size: Maximun Reach:
φ30-50 mm 170 mm
φ50-75 mm 220 mm

160154-Bearing-Separator-And-PullerSKU: 160155
Contents:
a.Separator φ30-50 mm, φ50-75 mm
b.Thrust Bolt 180 mm
c.Extension Bars 4*130, 4*105 mm
d.Cross Beam 160 mm
Separator Size: Maximun Reach:
φ30-50 mm 170 mm
φ50-75 mm 220 mm

Bearing Separator And Puller Set Features :

SKU: 160152
1.Heavy duty drop forged, heat treated steel
2.Construction hardened and tempered

SKU: 160153
1.Mechanical puller set with 30-50 mm and 50-75 mm separators, and single yoke with 180 mm thrust bolt.
2.Suitable for engineering, automotive, marine and agricultural applications.
3.Supplied in carry-case.

SKU: 160154160155-Bearing-Separator-And-Puller
1.Includes a Bearing Splitter with 4 capacity, two sets of hex push puller legs, a 8″ bar type puller head mated with a custom thread forcing screw.
2.Puller/Bearing set for tough jobs, up to 7-tons,and larger applications,and greater reach 8 to 16.
3.Capacity to remove steering stem bearing.

SKU: 160155
1.Mechanical puller set with 30-50mm and 50-75mm separators and single yoke with 180mm thrust bolt.
2.Suitable for engineering, automotive, marine and agricultural applications.
3.Supplied in carry-case.

Bearing Separator And Puller Set Advantages :

The bearing separator and puller set is packaged in a plastic case. This easy to carry and reduce the rate of loss the tools. It can be widely used in all kinds of gear. It is also helpful for the bearing of the assembly and disassembly. It through special processing, so it is more hardness and avoid rust. And it can prevent the gear or bearing from being damaged. The puller set is durable and not easy to deform. And the products can be a large area of contact bearing, so as to make uniform force and avoid slippage. And it’s easier for users to use. Although our products are  cheap, but the quality are still very good. And they are popular in the market. If you place the order, we will give you  the lowest price.

Fill out the form below including as much detail as possible,our staff will comeback to you within 12 hours.

Your Name (required)

Your Email (required)

Subject

Your Message