The Engine Timing Tool Set Introduction:
Engine Timing Tool Set Description:
Applicable: BMW, engine models M52TU, M54, M56
The tools are also applicable for camshaft timing on non-VANOS engines (M42, M50, M52TU, M54, M56).
Applicable: BMW MINI COOPER 1.4, 1.6, 16V CITRONE C4, C4 Picasso PEUGEOT 207, 308.
BMW: N12 (1.4/1.6), N14 (1.6), and N16 PAS: EP3, EP6 and EP6DT/DTS.
Comprehensive tool kit for locking camshaft in TDC position when checking or adjusting camshaft timing, and can replacing inlet camshaft or timing chain on BMW N51, N52, N53, N54, N55.
Applicable: BMW 6 cylinder engine: M52TU (1998-2000), M54 (2001-2004), & M56 (2003 to present).
The tools are also applicable for camshaft timing on non-VANOS engines ( M42, M44, M50, M52, MS50US and S52US ).
Petrol engines: VW POLO, Fox, SKODA Fabia, SEAT lbiza/Cordoba 1.2L engine, 2 and 3 cylinder, 6/12V.
Applications: VAG 3.0 V6 Petrol Engines;
Audi-A4, Cabrio, A6, A8. Engine Codes;
ASN, AVK, BBJ.
Applicable: 1992-1994 Audi 100s with the 12 valve AFC or AAH V6 engine, and similar engines used in A4s, A8s during the 1990’s and later.
Applicable: Renault 16V & K4J, K4M & F4P
Engine Timing Tool Set Features：
Special designe for using before installing the accurate engine.
BMW Double VANOS Master tool set contains a comprehensive set of tools to perform camshaft+VANOS timing on M52TU, M54, M56 Engines.
The engine timing tool set designed to set the twin camshaft on petrol engine of BMW MINI.
1.Contains the tools necessary to assemble and properly time the double VANOS camshaft adjustment unit found in 1998 and later 6 cylinder engines.
2.Special design for using before installing the accurate engine.
Master tool set contains a comprehensive set of tools to perform camshaft VANOS timing on M52TU, M54, M56 Engines.
1.Installing and removal of camshaft timing unit.
2.Checking and adjustment of timing.
1.Suitable for setting and locking VAG 3.0 V6 petrol engines.
2.Quad cam configuration drives all four camshafts from the crankshaft.
3.The engine timing tool set contains camshaft and crankshaft setting and locking tools plus camshaft sprocket adjusting tool,tension adjuster and tension locking pin.
4.Supplied with warning tags.
1.Extractor for the camshaft phasing gear with 5 and 6 spokes.
2.Pulling arms 17 and 23 mm.
3.This cam sprocket puller is the 3rd essential tool required when replacing the timing belt in the Audi V6 and V8 engines.
This new camshaft pulley setting tool holds two pulleys in place while changing the cam belt and correct engine timing to be performed when changing the timing belt.