161239-mechanical jack

Mechanical jack

Specifications:
1. Rated capacity: 1.5 T, 3 T, 5 T, 10 T, 16 T is optional.
2. Test load: 22 KN, 44.1 KN, 73.5 KN, 147 KN, 235 KN
3. Chain shake to lift full load: 280 N, 350 N, 400 N, 580 N, 800 N
4. Net. Weight: 14 kgs, 20 kgs, 28 kgs, 46 kgs, 63 kgs
5. Volume: 62*18*19 cm, 75*19*22 cm, 75*21*25 cm, 82*27*31 cm, 85*29*35 cm

SKU: 161239. Category: .

The mechanical jack introduction:

The mechanical jack specifications:161239-mechanical jack
161239:
1. Rated capacity: 1.5 T, 3 T, 5 T, 10 T, 16 T
2. Test load: 22 KN, 44.1 KN, 73.5 KN, 147 KN, 235 KN
3. Chain shake to lift full load: 280 N, 350 N, 400 N, 580 N, 800 N
4. Net. Weight: 14 kgs, 20 kgs, 28 kgs, 46 kgs, 63 kgs
5. Volume: 62*18*19 cm, 75*19*22 cm, 75*21*25 cm, 82*27*31 cm, 85*29*35 cm

Since the mechanical jack has different rated capacity, so  the size of every parts in the picture are also different:
A: 81 mm, 83 mm, 108 mm, 124 mm, 130 mm
B: 100 mm, 130 mm, 140 mm, 140mm, 150 mm161239-2-mechanical jack
C: 600-900 mm, 735-1090 mm, 730-1075 mm, 800-1190 mm, 820-1140 mm
D: 60-360 mm, 70-425 mm, 80-425 mm, 100-490 mm, 90-410 mm
E: 55 mm, 60 mm, 71 mm, 86 mm, 80 mm
F: 46 mm, 45 mm, 68 mm, 76 mm, 85 mm
G: 110 mm, 138 mm, 170 mm, 170 mm, 180 mm
H: 225 mm, 249 mm, 249 mm, 300 mm, 400 mm
K: 147 mm, 170 mm, 190 mm, 252 mm, 251 mm
R: 119 mm, 140 mm, 155 mm, 185 mm, 220 mm
S: 175 mm, 235 mm, 217 mm, 187 mm, 210 mm
T: 113 mm, 128 mm, 128 mm, 250 mm, 280 mm

The mechanical jack description:
Handle-type machanical jack of 1.5 T, 3 T, 5 T, 10 T are poineering products at home and are replacement of conventional hydraulic jacks. They are good for repairing the vehicles and lifting the tracks. They are strong in construction with high safety factor, easy to use and very popular with the industrial and mining enterprises. The mechanical jack is widely used in factory, warehouse, wharf  and so on to remove and install different equipments. It can be used not only horizontal but also variable-angle. It is the function that other products can not be used. Besides, the volume of the mechanical jack is much smaller than the other jacks. You can put it anywhere.

Notice:
1. You have to learn the weight of the object clearly before you use the mechanical jack. Because the mechanical jack prohibits the overload use in order to avoid any dangerous.
2. If the weight exceed the rated capacity, you can use several pieces of mechanical jack at the same time. But you have notice that these jacks must at the even load and keep the uniform speed when rise or decline steadily.
3. If the object can not be unload within a short time, you must the jack stand or other hard things to support the object.

 

 

Fill out the form below including as much detail as possible,our staff will comeback to you within 12 hours.

Your Name (required)

Your Email (required)

Subject

Your Message