160193
160194160195160196

Slide Hammer Bearing Puller Set

SKU: 160193
1.Four collets which fit a wide range of applications.
2.Select the appropriate sized collet by comparing it with the application.
3.Insert the collet, expand it to fit the hole, then attach the slide hammer assembly.
4.Housed in a blow-molded plastic storage case.

SKU: 160193. Category: .

The Slide Hammer Bearing Puller Set Introduction:

Slide Hammer Bearing Puller Set Description:160197-slide-hammer-bearing-puller

SKU: 160193
Slide Hammer Bearing Puller Set includes:
a.Four collet sizes: 7/16″ to 1/2″, 9/16″ to 11/16″, 5/8″ to 1″, 1″ to 1-1/4″
b.2-1/2 pound slide hammer with T-handle.

SKU: 160194
a.Small of internal puller 15mm-30mm.
b.Large of internal puller 30mm-80mm.
c.External puller 15mm-80mm.

SKU: 160195
Range:Mix Max:
8-11mm, 12-17mm, 18-23mm, 24-29mm, 30-34mm, 34-38mm, 39-43mm, 44-48mm, 49-53mm, 53-58mm.
Size:M10*1.5P, M10*1.5P, M8*1.25P, M10*1.5P, M6*1.0P

160198-slide-hammer-bearing-pullerSKU: 160196
Collet φ:9-11, 11-13, 13-16-16-17-18-20, 20-25

SKU: 160197
Ideal For Auto Body Repair
Slide Weight: 10LBS
Slide Pole Length: 22-3/4″
Slide Pole Diameter: 3/4″

SKU: 160198
Puller Type: Twin Leg
Lnternal capacity: 35-110mm Reach: 82mm
External capacity: 50-140mm Reach: 75mm
Puller Type: Triple Leg
Lnternal capacity: 50-135mm Reach: 82mm
External capacity: 20-135mm Reach: 75mm

SKU: 160199
Slide Hammer Bearing Puller Set Contents:
Slide Hammer, 1/2″Sq Drive Sockets; 25, 27, 29, 30mm, Tamper-Proof Key, 5*Adaptor(Bosch,Delphi,Denso,Siemens), Ball Joint

 

 

Slide Hammer Bearing Puller Set Features :160199-slide-hammer-bearing-puller

SKU: 160193
1.Four collets which fit a wide range of applications.
2.Select the appropriate sized collet by comparing it with the application.
3.Insert the collet, expand it to fit the hole, then attach the slide hammer assembly.
4.Housed in a blow-molded plastic storage case.

SKU: 160194
Locking the nut to open 3-jaws and clip on the bearing and then use the slide hammer to pull out the bearing.

SKU: 160195
1.Comprehensive kit offering leg style and slide hammer pulling assemblies for use with expanding split collets.
2.Removes bearings easily where access is available in the centre of the bearing.
3.Collet expands and grips on the underside of the bearing.

160200-slide-hammer-bearing-pullerSKU: 160196
1.Medium stroke 1.4kg slide hammer with 390mm shaft.
2.Bearing extractor collets with internal capacity from 9 to 34mm.
3.Supplied in carry-case.

SKU: 160198
1.Pulls flange-type rear axles and most front-wheel drive hubs.
2.Internal and external jaws provide a variety of combinations to pull bearings and gears and seals.
3.Two-and three-way cross blocks and cone provide the perfect jaw configuration for most jobs.
4.Set also includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements.

SKU: 160199
1.Suitable for the fast and safe removal of Bosch, Delphi, Denso and Siemens diesel injectors.
2.Ball joint allows hammer to be used in confined areas.
SKU: 160200
1.Use to remove stubborn diesel injector.
2.No need too remove cam cover and the use of slide hammer.
3.For mercedes C-class, Sprinter Vehicles and chrysler grand cherokee 27crd (00-)

Fill out the form below including as much detail as possible,our staff will comeback to you within 12 hours.

Your Name (required)

Your Email (required)

Subject

Your Message