161219-transmission jack
161216-transmission jack161219-20-transmission jack161221-transmission jack161222-2-transmission jack

Transmission jack

Specifications:
1. Capacity: 0.5 ton, 1 ton, 1.5 ton, 2 ton
2. Min. Height: 1100 mm, 1260 mm, 870 mm, 880 mm, 190 mm, 200 mm, 210 mm, 265 mm
3. Max. Height: 1900 mm, 1970 mm, 1800 mm, 1810 mm, 680 mm, 760 mm, 780 mm, 900 mm
4. G.W: 32 KGS, 45 KGS, 68 KGS, 86 KGS, 88 KGS, 42 KGS, 62 KGS, 67 KGS, 73 KGS, 104 KGS, 9.5 KGS
5. N.W: 30 KGS, 39 KGS, 60 KGS, 80 KGS, 82 KGS, 40 KGS, 60 KGS, 55 KGS, 61 KGS, 92 KGS, 9 KGS

SKU: 161216-161225. Category: .

The transmission jack introduction:

The transmission jack specifications:161216-transmission jack

161216:
1. Capacity: 0.5 ton
2. Min. Height: 1100 mm
3. Max. Height: 1900 mm
4. G.W: 32 KGS
5. N.W: 30 KGS
6. Package size: 105*25*27 mm

161217:
1. Capacity: 0.5 ton
2. Min. Height: 1260 mm
3. Max. Height: 1970 mm
4. G.W: 45 KGS
5. N.W: 39 KGS
6. Package size: 113*31*38 mm

161219-20-transmission jack                                                                                          161220:
1. Capacity: 1 ton
2. Min. Height: 880 mm
3. Max. Height: 1810 mm
4. G.W: 88 KGS
5. N.W: 82 KGS
6. Package size: 55*36*85 mm

161221:
1. Capacity: 0.5 ton
2. Min. Height: 190 mm
3. Max. Height: 680 mm
4. G.W: 42 KGS
5. N.W: 40 KGS
6. Package size: 83*47*28.5 mm

The transmission jack description:
The transmission jack is used  to remove and install the parts of the car which weight not exceed 500 kgs. For example, the auto gearboxes, engine, drive motor and so on. It is a necessary lifting tools for the automobile service factory and it is the corollary equipment for automobile lift. It can be divided into two types, big-endian type and little-endian type. The function of them is the same. The different between them is the big-endian is working when the car be lift very high. And the little-endian is working when the can be lift the position of the low. It depends on which parts of the car need to be repaired. As you can see in the picture, some type of the transmission jacks have a
pull-tab. You can pull it to help your repairing. It is very convenient. Of course, you can choose the transmission jack according to your requirements.

Notice:
1. Please do not want the overload use not to when not the clear hoisting object weight uses this transmission jack.
2. Please clinch the object by chain before you move the transmission jack.
3. Please put the bracket to the lowest place if the transmission jack need to be moved after load the object.
4. The ground should be firm and flat. If the road is uneven or full of obstacles, the wheels of the transmission jack maybe damaged or the transmission jack will careen.

 

 

Fill out the form below including as much detail as possible,our staff will comeback to you within 12 hours.

Your Name (required)

Your Email (required)

Subject

Your Message